Isuzu Fresh Milk Tank Truck

ISUZU Fresh Milk Tank Truck is mainly used to transport fresh milk and other liquid foods. The tanks are made of food-grade stainless steel plates to ensure that the transported food will not be contaminated. At the same time, an insulation layer is required on the outside of the tank to prevent fresh milk from going bad. The inside of the tank needs to be clean and without sharp angles, which is for the convenience of cleaning and sterilization, and to ensure the hygiene and safety of fresh milk. In addition, in order to further ensure hygienic safety, a CIP (cleaning device) is generally installed in each milk tank for regular cleaning and disinfection of the inside of the tank.

 

Vehicle size:8700*2500*3100mm

Wheelbase:4700mm

Volume:10000L

 

 

Item	Unit	Description
Model		ISUZU Fresh Milk Tank Truck
Dimension	mm	8700*2500*3100
Sample Tank Dimension	mm	5700×2400×1600
	Litter	10000
	material	food-grade SUS304-2B stainless steel, 4 mm thick
Curb Weight	kg	7505
G.V.W	kg	18000
Wheel Base	mm	4700
F/R track base	mm	1876/1820
F/R Axle-Load	Kg	6500/11500
	Type	Steel Spring Type
Approach/Departure angle		17/10
Traction system	Type	4*2
Max speed	Km/h	98
Tire Specification/Number	Model	10.00R20 , 6 Unit +1 Spare Unit
Engine model	Model	4HK1-TC50
	Horse Power	205
	Type	Diesel, 4cylinder, Turbocharge , Inter-Cooling
	Standard	Euro IV
Gear box	Type	6 F & 1R , Manual
	Brand	ISUZU
Fuel Tank	Liter	160
Electric system	V	24
Cab	Person	3
	Type	Reversable, Manual
	Steering	Powering , LHD
	Installing	Mp3, Radio
	Air Conditioner	Hot Wind / Cold Wind
Equipment	Installed	1.) installing water pump

 

 

●The tank body adopts an oval horizontal tank structure, which is divided into open warehouses and three groups of anti-wave boards or three independent tanks.

Vertical compartment type large milk tanker (can be adjusted according to user needs). The tank Liner Adopt 30m thick food grade AISI304-2B stainless steel plate. CNC automatic argon arc .Flat welding machine tailor welding forming, exposure pressure polishing machine for grinding and polishing, large surface plate machine one-time.

Curled into an elliptical cylinder, dirt is not easy to accumulate.

 

●The head of the compartment in the tank is made of 4mm thick 304 2B stainless steel plate butterfly Shaped head, the head is formed by one-time hydraulic inflation, and the appearance is uniform Said, beautiful shape. It can effectively alleviate the impact of fresh milk on the vehicle while driving. The impact of the tank head, the impact resistance is much higher than that of the flat head and conical head.

 

●Partition/wave board of the milk transport truck

The 4mm thick 304 2B stainless steel plate is expanded into two butterfly-shaped closed partitions and two anti-wave panels with manholes, all partitions/anti-wave panels are installed on the interior of the tank car liner is equipped with an arc-shaped flushing edge, so that the connection with the liner is formed Wide angle for easy cleaning. All welds inside the tank are in accordance with the Australian production process Art requires 6 grinding machine polishing treatment, the treatment effect reaches international food quality level requirements. The strength of this butterfly head is much higher than that of flat head or corrugated plate head.

 

● The insulation layer is covered with imported polyurethane foam spray foam to cover the entire tank of the Milk transport Truck and tie it securely With the outer side of tank car liner, plus 10m Rubber and plastic cotton fire insulation, uniform organization Delicate, substantial and good thermal insulation effect exist.

Transportation of liquid food at room temperature When the temperature difference is 30°C, the temperature change within 24 hours does not exceed 1°C. Outer tank; the installation method of the shell is riveted together, which is more convenient for installation and maintenance, and the weight is greatly reduced households to load more milk.

CIP cleaning system: CIP cleaning points are evenly distributed inside the tank car, all of which are made of SUS304 material, and the cleaning spray water can 360° rotation, so that the cleaning fluid can reach any part of the tank, and ensure sufficient impact.

Milk inlet/discharge port: at the rear of the tanker, there is a butterfly valve with a diameter of 50mm milk inlet/discharge port and a 50mm nozzle and a cover without tapping nuts Composition, ending at the rear of the tanker inside the rear milk tank.

 

Two-way breather valve: an integrated breather valve system, which will be installed together with the milk inlet/milk discharge port to ensure that the

Ventilation performance during industrial processes.

 

Anti-slip platform: The anti-slip platform is made of stainless steel or alloy aluminum plate through stamping and folding forming anti-slip pedals, which can effectively prevent the slippery effect avoids the failure of anti-slip due to cold weather and icing, so that the operator can walk safely on the top of the tank when washing the tank.

Escalator: The escalator is bent and welded to the front of the vehicle transport tank by SUS304 stainless steel pipe, which is convenient for operators to go up and down.

 

 

 

 

 

 

 

 

Looking for a trustworthy supplier of Fresh Milk Tank Truck? You've come to the right place! Check out these frequently questions to help you make an wise decision:

 

Q: What is a milk transport truck?

A: Milk transport truck is a specially designed vehicle for transporting fresh milk from farms to processing facilities. It features a tank that is insulated and equipped with cooling systems to ensure the milk remains fresh during transportation.

 

Q: What is the capacity ?

A: The capacity can be from5cbm to 30cbm . Contact us for more information on the capacity of your specific fresh milk delivery truck.

 

Q: What kind of milk can be transported in the milk hauling truck?

A: The milk hauling truck is designed to transport raw milk from cows, goats, sheep, and other dairy animals.

 

Q: Is the Fresh Milk Tank Truck easy to operate?

A: Yes, the Fresh Milk Tank Truck is designed to be easy to operate, with user-friendly controls and features.

Hot Tags: isuzu fresh milk tank truck, China isuzu fresh milk tank truck manufacturer, suppliers, factory, Shacman Milk Tender Truck, Dongfeng Water Cartage, isuzu stainless steel tanker truck, howo water tender, Water Tank Truck, isuzu potable water tender truck