Mastering the maintenance knowledge of Chengli garbage truck is enough
About the maintenance knowledge of Chengli garbage truck:
1. What daily maintenance and upkeep should be done for garbage trucks?
2. Maintenance and upkeep methods for garbage truck batteries
What maintenance and upkeep should garbage trucks do on a daily basis
The first and foremost point is to regularly check the connection of the garbage truck's wiring harness, mainly through visual inspection. Check if the wiring harness of the garbage truck has cracks, looseness, poor contact, and other phenomena. If there is none, it definitely means it is normal. If there is, it is necessary to go to the after-sales service point of the garbage truck for further detailed inspection.
The second point is to regularly check the tire pressure, tread wear, and nuts of the garbage truck for looseness. The first method is visual inspection, and the best inspection cycle is once a week. Then further experiment to make the garbage truck run and see if there is a feeling of deviation or swinging. If there is, do not force it to be used, otherwise there may be a major safety accident during the driving process of the garbage truck. At this time, it is necessary to go to the after-sales service point of the garbage truck for four-wheel alignment or dynamic balance check until it is qualified before it can be officially put on the road.
The third point is to check the oil and brake fluid of the garbage truck once a week to see if there is a shortage.
The fourth point is to check whether there is any oil or water leakage on the chassis of the garbage truck. Therefore, it is not only necessary to visually inspect whether there is any abnormality in this regard, but the chassis of the garbage truck is generally produced by large factories such as Dongfeng. These garbage truck chassis can be jointly guaranteed at national after-sales points such as Dongfeng. It is also best to go to a manufacturer's after-sales point like Dongfeng for regular maintenance of the chassis.
The fifth point is to check whether the fan belt of the garbage truck is damaged or broken, adjust the tightness of the belt, and replace it in a timely manner.
One thing to pay special attention to is the regular inspection of the braking system of the garbage truck. The braking of the garbage truck relies on friction to produce the braking effect. However, after long-term use, the braking of garbage trucks may be affected by dirty debris such as water and mud, which can cause a sharp decrease in friction coefficient. As a result, the braking effect of garbage trucks will be greatly reduced, and there is a possibility of major safety accidents on the road, resulting in vehicle damage and fatalities.
The above five points are necessary inspection items in daily life, only in this way can the safety and normal use of garbage trucks be ensured, and the service life of garbage trucks can be extended to a certain extent, reducing the maintenance cost of garbage trucks.
Maintenance methods for garbage truck batteries：
Do not store the power supply, regularly check for liquid shortage, and recharge every 2 months when not in use for a long time.
