DFAC Aerial Work Platform Truck

 

According to the type of boom, aerial working truck are divided into straight book aerial working truck and folding boom aerial work truck ; overhead working trucks are widely used in municipal construction, electricity, communication, fire protection, landscaping, roads, and docks. In the field of port and other engineering, it is a new and efficient installation, maintenance, and repair equipment.

PRODUCT FEATURES

Chassis：The DFAC latest design luxury cab, 1920mm width, wheelbase 3308mm, Yunnei Dewei 160 horsepower (low-speed high torque, output torque of 400 Nm), National VI emissions, 8-speed gearbox (with high and low speeds), 2.3-ton front axle, 6-ton rear axle (with stronger load-bearing capacity and climbing ability), 7.00R16 steel wire tires, double-layer straight beam, air brake, original air conditioning, electric doors and windows, central locking, multifunctional steering wheel.

 

Superstructure：The working height can be 20- 33 meters, and the boom and bucket can rotate 360 degrees. The flying arm can bend and adjust the operating range, ensuring safety and stability. It is equipped with a 220V external emergency power supply. It is a comprehensive product that integrates mechanical, hydraulic, electrical, and remote sensing functions.

Original power take-off, one click control, reasonable vehicle length, width, and height ratio, making the vehicle look beautiful and refreshing. The whole vehicle can perform mechanical and external wireless remote sensing operations, using CAN intelligent control system, centralized control of electricity, fluid and gas, real-time monitoring of driver operation behavior and vehicle working status, overload warning and other functions, thereby ensuring the safety of operators.

 

VEHICLE PARAMETER

Vehicle model	CLW5049JGK6AJB	wheelbase(mm)	3308
Engine model	YN25PLUS160B
Engine power(PS)	160
External dimensions (length x width x height)	5998*2230*3200(mm)
Maximum total mass(kg)	4495	curb weight(kg)	4300
Main performance parameters
Rated load of work platform(kg)	200	Maximum working height(m)	32.8
Operating range at maximum working height(m)	3.1	working height at maximum amplitude (m)	5
Bucket dimensions(m)	1.6x0.75x1.1	Bucket rotation angle(°)	360

 

VEHICLE ADVANTAGE

◆The structure of our aerial work platform is compact , small size, low center of gravity, suitable for small workplaces, flexible maneuverability, and high stability.

 

◆Good homework performance and wide homework scope

The maximum working height is 32.8m, and the turntable can rotate freely at full range. The action is simple, easy to operate, the execution is fast, the scope of the operation is large, and the operation parameters are leading international similar products. This car adopts a seven section arm, with synchronous extension and retraction of the arm body, stepless speed regulation, and superior operational performance; The work platform is located at the back, and a ladder for getting on and off the platform is set up for personnel to get on and off. The work platform is equipped with lighting for night work.

 

◆Flexible and convenient operation, the turntable can rotate within ± 360 ° without any angle limitation

 

◆ High reliability

The main control components and key transmission parts are all made of internationally renowned brands, with stable and reliable quality.

 

◆ Superior safety performance

The interlocking device for getting on and off the vehicle, emergency electric pump, bidirectional hydraulic lock, vehicle level gauge, etc. jointly ensure the safety of the vehicle operation. The bidirectional balance valve prevents the working arm from automatically falling, ensuring smooth movement of the arm and the working bucket

 

◆Smooth movement

Hot Tags: dfac aerial work platform truck, China dfac aerial work platform truck manufacturer, suppliers, factory, 6 3ton Folding Arm Crane Truck, ISUZU Potable Water Truck, isuzu Foam tender, Ramps Low Loader, fire truck with pumper, Isuzu airport fire truck